Fluke 771 Milliamp Process Clamp Meter
Fluke 771 Milliamp Process Clamp Meter 2Fluke 771 Milliamp Process Clamp Meter 3Fluke 771 Milliamp Process Clamp Meter 4

Fluke 771 Milliamp Process Clamp Meter

Milliamp process clamp meters can measure mA signals without breaking the loop. The popular Fluke 771 mA Clamp Meter saves time by making fast, accurate measurements on 4-20 mA signal loops without breaking the circuit.

Overview

Need more hours in your day?

Save time by NOT breaking the loop on 4-20 mA signal measurements.

Are you spending time:

  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
  • Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 771 Clamp Meters will help you:

Milliamp Clamp Features Application How it saves time and money
Measure mA signals for PLC and control system analog I/O without breaking the loop. Measures low level dc current Correlate process indication with real physical value
Measure output signals from transmitters without breaking the loop Maintain and troubleshoot process and automation equipment without breaking the loop No disruption to the process
Detachable clamp with extension cable Measurements in tight locations Enables measurements in difficult situations
Measurement Spotlight Illuminates hard to see wires in dark enclosures Measurement process is easier and quicker
Measure up to 99.9 mA range non-contact Wide range of measurements Measures 10 to 50 mA signals in older control systems
Automatic power off After 15 minutes and 2 minute automatic off for backlight and spotlight Saves battery life

The 771 mA Clamp Meter features:

  • Best in class 0.2 % accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without ”breaking the loop”
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements

What’s the difference between the 77X models?

.

Fluke-771

Fluke-772

Fluke-773

.

Non-contact mA loop measurement

Integrated mA loop troubleshooting

Advanced process troubleshooting

mA measure, jaw
mA measure, in circuit .

Loop power  .

mA source .

DCV measure . .

DCV source . .

mA scaled output . .

mA in / out . .