Milliamp process clamp meters can measure mA signals without breaking the loop.The Fluke 773 mA Clamp Meter is Fluke’s premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power.
Need more hours in your day?
Save time by NOT breaking the loop on 4-20 mA signal measurements.
Are you spending time:
If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Here are some specific ways the Fluke 773 Clamp Meters will help you:
|Milliamp Clamp Features
|How it saves time and money
|Measure mA signals for PLC and control system analog I/O without breaking the loop.
|Measures low level dc current
|Correlate process indication with real physical value
|Measure output signals from transmitters without breaking the loop
|Maintain and troubleshoot process and automation equipment without breaking the loop
|No disruption to the process
|Detachable clamp with extension cable
|Measurements in tight locations
|Enables measurements in difficult situations
|Source, simulate and measure mA signals in circuit (break the loop)
|Confirm non-contact measurement. ve the next tool in hand for troubleshooting (source simulate)
|Eliminates the need to return to the shop to get a loop calibrator for troubleshooting after finding a bad signal with non-contact measurement
|Source and measure VDC
|Troubleshoot voltage input and output devices.
|Measure presence of 24V loop power. Measure 1 to 5 or 0 to 10V process signals. Test chart recorders
|4 to 20 mA In/out
|Dual channel mA source and measurement for troubleshooting
|Source 4 to 20 mA signals into valves and mA signal conditioners and simultaneously measure 4 to 20 mA positioning output signals.
|4 to 20 mA scaled output
|Scaled mA output provides a mA signal output representative of the measured mA value
|Connect a logging DMM and log the mA signal without breaking the loop
|Loop power supply
|Power a transmitter
|Substitute testing of the installed 24V loop power supply. Power a transmitter and measure its mA output signal for troubleshooting.
|Dual backlit display with both mA measurement and percent of 4 to 20 mA span
|Clear measurement presentation
|Allows quick measurement evaluation
|Illuminates hard to see wires in dark enclosures
|Measurement process is easier and quicker
|Measure up to 99.9 mA range non-contact
|Wide range of measurements
|Measures 10 to 50 mA signals in older control systems
|Automatic power off
|After 15 minutes and 2 minute automatic off for backlight and spotlight
|Saves battery life
The 773 mA Clamp Meter features:
What’s the difference between the 77X models?
Non-contact mA loop measurement
Integrated mA loop troubleshooting
Advanced process troubleshooting
|mA measure, jaw
|mA measure, in circuit
|mA scaled output
|mA in / out