Water Quality Electrodes & Sensors
23 products. Genuine Lovibond consumables, authorised distribution.
Electrodes and sensors are the consumable half of any electrochemical measurement: pH, ORP, conductivity, dissolved oxygen and temperature probes all drift and eventually need replacing. Measurands supplies the genuine Lovibond electrode and sensor range, including optical DO probes, conductivity cells and Pt1000 temperature sensors in the cable lengths the instruments actually take. Tell us your meter model and we will confirm the correct electrode, connector and cable length.
Cell for Salt
SD conductivity cell type LC 9 for reliable salt determination in aqueous solutions, up to 10%.
View specs
Conductivity cell, 1m cable
SD conductivity cell type LC 8 with two graphite electrodes, up to 200 mS/cm.
View specs
LC10 Pure water conductivity cell for SD320 / SD325 with 1m cable
Pure-water conductivity cell for the SD320/SD325 - stainless-steel electrodes, below 200 uS/cm.
View specs
LC12 for SD320 / SD325 Con, up to 200 mS/cm
4-pole conductivity cell eliminating polarization effects, up to 200 mS/cm.
View specs
LC16 for SD320 / SD325 Con, up to 1000 mS/cm
4-pole conductivity cell for medium-to-high conductivity ranges, up to 1000 mS/cm, corrosion resistant.
View specs
Optical DO-probe with 10m cable, bottle for storage and Micro-SD-card with calibration data
Drift-free optical dissolved-oxygen probe using luminescence technology, 10m cable.
View specs
Optical DO-probe with 1.5m cable, bottle for storage and Micro-SD-card with calibration data
Drift-free optical dissolved-oxygen probe using luminescence technology, 1.5m cable.
View specs
Optical DO-probe with 3m cable, bottle for storage and Micro-SD-card with calibration data
Drift-free optical dissolved-oxygen probe using luminescence technology, 3m cable.
View specs
Oxygen sensor, 4m cable
Polarographic oxygen sensor for universal use up to 20 mg/L dissolved oxygen.
View specs
Oxygen sensor for SD310 / SD315 Oxi with 10m cable, Platinum cathode/Lead anode
Galvanic oxygen sensor for the SD310/SD315 Oxi, up to 70 mg/L dissolved oxygen, 10m cable.
View specs
Oxygen sensor for SD310 / SD315 Oxi with 2m cable, Platinum cathode/Lead anode
Galvanic oxygen sensor for the SD310/SD315 Oxi, up to 70 mg/L dissolved oxygen, 2m cable.
View specs
Oxygen sensor for SD310 / SD315 Oxi with 30m cable, Platinum cathode/Lead anode
Galvanic oxygen sensor for the SD310/SD315 Oxi, up to 70 mg/L dissolved oxygen, 30m cable.
View specs
pH electrode, plastic/gel, type 226, without temperature sensor, BNC-plug
Low-maintenance SD pH electrode with gel electrolyte and fast response times, BNC-plug.
View specs
pH electrode glass/gel, type 235, BNC-plug for SD300 and SD305 pH, without temperature sensor
Chemical-resistant glass-bodied SD pH electrode, easier to clean, for SD300/SD305 pH.
View specs
pH-electrode, pH 0 - 14, plastic/gel type, BNC-plug
Cost-effective, universally applicable pH electrode with gel electrolyte, BNC-plug.
View specs
pH/temp. electrode, type 230, plastic/gel/temp. NTC30k Ohm, DIN 19262-plug for pH 200
SD pH/temperature electrode with DIN 19262 plug, for the pH 200 meter.
View specs
pH/temp. electrode, type 231, plastic/gel/temp. NTC30k Ohm, BNC-plug for SD300 / SD305 pH
Low-maintenance SD pH/temperature electrode with integrated temp sensor, for SD300/SD305 pH.
View specs
Pt1000, temperature sensor, metal, diameter 3mm
Platinum Pt1000 temperature sensor for measurements up to 250 degC, for the SD300/SD305.
View specs
Redox electrode, plastic/gel, BNC-plug, 1m cable
SD redox/ORP electrode with a high-quality platinum electrode for reliable redox monitoring.
View specs
Replacement electrode for SD50 pH
Low-maintenance pH replacement electrode with built-in temperature sensor, for the SD50 Pocket Tester.
View specs
Replacement electrode for SD60 ORP
ORP replacement electrode with an accurate platinum electrode, for the SD60 Pocket Tester.
View specs
Replacement electrode for SD70 Con, SD80 TDS, SD90 Salt
Replacement conductivity/TDS/salinity electrode with easy-clean graphite electrodes, 25 degC reference.
View specs
Temperature probe Pt 1000, 1.5m cable
Pt1000 temperature probe with jack-plug connection, for the SD150 multiparameter instrument.
View specsWater Quality Electrodes & Sensors — common questions
Is your Water Quality Electrodes & Sensors range genuine Lovibond stock?
Yes. Measurands supplies Lovibond consumables through authorised distribution, so formulation, batch quality and shelf life are exactly as the manufacturer intends, never repackaged or grey-market stock.
Do you supply Water Quality Electrodes & Sensors to Batam, Bintan and Singapore?
Yes. We supply water-testing consumables to customers across Singapore, Batam and Bintan. Send us the parameter, pack size and quantity and we will confirm availability, lead time and price.
How do I know which one works with my instrument?
Tell us the photometer, comparator or meter you run and the method you follow, and we will confirm the correct product, range and pack size before you order.
Need the right instrument for the job?
Tell us what you're measuring — we'll recommend and quote the best fit.